Motion Controller Products

KR210AU / KR220AU
1-axis/2-axis common
Motion Control Unit

166368324789488350048111738.png

The MR210AU/MR220AU series is a programmable motion control unit that packs a rich array of functions into a compact design for small-scale products. With built-in EEPROM, it allows programming of parameters and up to 64 position data points for each axis. The MR210A is for 1-axis use, and the MR220AU is for 2-axis use.

● All models are equipped with an RS-232C port as standard; models with a built-in USB port can be easily connected to a computer.
● Windows compatible; programming is simple with dedicated software.
● The dedicated remote box (MR200RB) enables programming, various parameter settings, and manual operation & program start for each axis.
● Features a one-touch DIN rail mounting mechanism for easy installation in control boxes.
● Using parallel I/O, control is possible from PLCs and various switches, and 64-point data can be programmed for each axis.
● Five operation modes to support various control needs.
● Home search can be easily set through step selection.

Motion Control Board

MC8043P
Motion Control Card

166368324791686393904234258.png

The MC8043P is a PCI bus-compatible board for PC/AT compatible machines, equipped with the 4-axis motion control IC "MCX314As" featuring interpolation functions. A single port enables independent positioning control or speed control for four axes of servo motors or stepping motors. In addition, any two or three axes can be selected from the four to perform 2-axis/3-axis linear interpolation, CW/CCW circular interpolation, and 2-axis/3-axis bit pattern interpolation (bit data interpolation by the CPU).

● Control axes: 4 axes (independent simultaneous control possible)
● Driver speed: 1 PPS to 4 MPPS
● Drive speed: 1 PPS to 4 MPPS
● 2-axis circular / 3-axis linear interpolation function
● Constant speed / trapezoidal / parabolic S-curve
● Encoder A-phase/B-phase/Z-phase
Compatible OS: Windows XP/Vista/7
Includes device driver and sample programs (VB, VC++)
RoHS compliant

MC8022P (2-axis) / MC8042P (4-axis) / MC8082P (8-axis)
General-purpose Multi-axis Motion Control Card

166368324792903196035393250.png


The MC8002P series is a PCI general-purpose motion control board supporting 2 to 8 axes, equipped with the MCX304. By setting the board ID, up to 16 boards of the MC8002P series can be used in a single PC. Since all boards operate with the same device driver, increases in the number of axes due to specification changes can be handled with relatively simple program modifications.
In addition to various sensor inputs, general-purpose outputs are also provided.

● Control axes: MC8022P (2 axes), MC8042P (4 axes), MC8082P (8 axes)
● Driver speed: 1 PPS to 4 MPPS
● Output: Pulse train output (line driver output)
● Acceleration/deceleration curves: Trapezoidal drive, asymmetrical trapezoidal drive, parabolic S-curve acceleration/deceleration
● Automatic home search function
● Compatible OS: Windows XP/Vista/7
● Included software: Device driver, sample programs (VB/VC++), evaluation tool program
RoHS compliant